I have always loved the colors of a peacock feather! Over the years I have been asked to imitate this color combo on furniture….and I’ve gone about it several ways. This layered paint look experiment was by far the easiest of the techniques….AND resulted in the most luxurious finish! So I decided to share with you….as I am asked the question so often…..”how do you achieve a layered paint look?”. This is one VERY simple way!
This desk began with a very “orangey-ish” look that I had no doubt would bleed through my colors and cause me problems! So Julie gave it a quick simple brushed on layer of Shellac. Yes, it smells awful and we try NOT to use it often….but I did not want to go with a primer as I had full intentions of sanding through the layers and did not want to expose a white or gray primer. Here is the before pic:
The next step is to seal this coat of blue so that it is NOT removed when I sand to EXPOSE it….hence the “layering”. So Danube is now dry and I slapped on a coat of Vintiques Water-Based top Coat in Satin.
I honestly do not EVER wait as long as you are instructed to in between layers….but in this case the vanity sat overnight because real life happens sometimes. The next day I had a friend visiting and she volunteered to help while I worked on several projects. She had NO experience with chalk paint….so I thought….what the heck?! Let’s just throw this at her. I gave her a can of Tanya and one of my Best Chalk Brushes from HTP and let her go! She did this at mock speed! One coat and this vanity was covered! There was ZERO Danube showing through! This paint has incredible coverage! Not to mention she was feeling pretty professional! Thanks, Donna! Now let’s watch paint dry!
It’s time to bring through the under layers. I began with the drawers. I used a 220 grit sanding paper
wrapped around a sanding block (it’s just a comfortable way for me to hand sand). I should mention that this paint “wet distresses” beautifully…but that is not the look I wanted here. And that is another blog post entirely. So here is a sanding shot:
It doesn’t take much at all to exposed the underlayer! And it is so exciting as it comes through….really y’all…..I get really excited! So I sanded all 6 drawers and then went after the body! It all looked just like the above pictures when I was done…..I just forgot to snap a photo. Mostly because I could not WAIT to start with the colored wax! I had decided to do the the drawers and the top surface in more of a blue while leaving the body in a green tone. And this is how it went down….beware….lots of pics!
Heavily brushed on a layer of Periwinkle Wax, which is like whipped heaven!!!!! The wax also comes in a spray form, which is pretty amazing too. (NOTE: Periwinkle is no longer available, but the Jewel Tone Wax is the next closest thing and will achieve the same look) I was careful to really load it in the low lying crevices around the details! That is where it will live forever after I wipe off the excess wax. Here is how it looks as you cover it in colored wax….
Once the drawer is fully covered I then wiped off the excess wax with a clean cotton cloth. It is super easy to remove and really a “no brainer”…so don’t be afraid!
I can’t even tell you how excited I was with this color combo!!! Just look at the comparison above…..from the waxed drawers on top to the non-waxed on bottom!!! Both are pretty….but that Periwinkle Wax just took pretty layered paint to another level! (Try the new Jewel Tone Wax – it is just as amazing. )
All drawers are completed….but missing something…so I had to do it! Bring on the gold! ‘Cuz when your UGS are gold sequined…you have permission to make anything GOLD!
My “go-to” gold is from is a Liquid Gold Leaf … and it rocks my world almost daily. And maybe makes me a little high…
I then did this exact same Periwinkle waxing process on the top surface…but again….I forgot to stop for pics. Probably because at this point I am ONLY thinking about breaking out the Peacock Soft Wax! I realize that the Peacock Wax is almost the exact hue as the Tanya paint….but knew it would just deepen it ever so slightly and bring out the rich pigment of the green! So here it goes….
I brushed this on the entire body making sure to get deep into any grooves so it could settle as an accent. And then like before….I wiped back the wax with another clean rag! And then I stood back and fell hard in love…..love at first sight…and it was SO easy!!!!!
Look at that picture up there!!! It’s like a sunset…but the blue-green version! Look at that layered paint!
It’s not me, people! It’s the products! I promise!!!! Heirloom Traditions Chalk Type Paint has over 100 colors to choose from! You can achieve this layered look in any color combo you want…just follow my lead!
I’ve included the link to their website throughout this blog….but here it is again…..Heirloom Traditions Chalk Type Paint . Their website is super easy to navigate. You will find waxes under the section “finishing”. If you use my promo code FANCY you’ll get 10% off and help me earn free products so I can keep working with layered paint.
Recap on the products I used…..
Paint: Danube and Tanya
Wax: Periwinkle and Peacock (Now Jewel Tone instead of Periwinkle)
Sealer between coats: Aqua Clear
AND don’t forget the BRUSH!!!! It makes all the difference when painting with true chalk type paints!
If you are familiar with Chalk Type Paints but haven’t tried Heirloom Traditions….I hope this inspires you to try layered paint!
If you are already a Heirloom Traditions Chalk Type Paint fan AND pro….but have been hesitant to layer….I hope this inspires you to make a layered paint furniture too!
And thank you! Thank you for your time here with me! Thank you for your love and comments on our blog and social media! You inspire me daily…..to try and continue to inspire others! Please subscribe to my my blog for more painting tips.
Pin my Gilded Peacock – layered paint furniture and share it with your peeps. Follow me on Pinterest while you’re at it! I will follow you back!